[6.3.0] - 2019-12-04
NEW: Added support for PCR2 R03 with firmware V3.0.x
[6.2.0] - 2019-11-05
NEW: Add Settings to the DB when in Admin mode
FIX: Wait when closing serial port
FIX: Removed Drivers from Help Menu as these are not needed for Win10 anymore
[6.1.0] - 2019-10-10
ADD: LoRaWAN™ enable
ADD: Support for PCR2 V2.0.x
[6.0.1] - 2019-09-02
FIX: LastUpdatedBy not read from DB
FIX: Check for serial number before writing to DB
CHG: Add Firmware Version to Configuration Payload
[6.0.0] - 2019-09-29
Changed to SimplDeploy as ClickOnce is broken
FIX: PCR1 Updated to new device library
FIX: PCR2 Simulator broken
[5.6.2] - 2019-09-03
FIX: PCR1 Updated to new device library
FIX: PCR2 Simulator broken
[5.6.1] - 2019-08-21
FIX: Tuning for PCR2 FW 1.5.2 (bigger timeouts)
[5.6.0] - 2019-07-31
FIX: All is async now
FIX: waiting longer for V1.5.1 to connect due to radar init
CHG: Removed FW1.3, FW1.4 as not in the field anymore
[5.5.0] - 2019-07-23
- Added Simulator Mode
- Added calculated Config Downlink Field
- Added Save Settings
[5.4.0] - 2019-07-10
- Changed name to “Factory Login” and “Factory Settings”
- FW 1.5.0 added
[5.3.0] - 2019-06-12
- Login by DoubleClicking Parametric Logo
- Version for GPV Production of PCR2, TOPSNAP
[5.2.3] - 2019-06-03
[5.2.2] - 2019-06-03
- Bugfix on DeviceMenu
- try/catch over JSON parser
[5.2.1] - 2019-05-31
- Improved login
- Show shipped to on PCR2 devices
[5.2.0] - 2019-05-24
- New Layout for PCR1 V1.x and V2.x
- Changed Date Input to a more useful format
- Added “Notes” Field for additional informations only seen by Parametric
[5.1.0] - 2019-05-08
- Added PCR2 FW 1.4.x”
- Changed name of “Uplink Delay” into “Event Suppression”
- Added Property Radar Sensitivity (10 … 100% ) 100% is det.lim 200, 10% is 5000
- added some links to the KB
[5.0.2] - 2019-05-06
- Bugfix: Show Message when Settings have been saved in Production Mode
[5.0.1] - 2019-05-03
- Bugfix: FW 1.2.0 was not recognized in V5.0.0
[5.0.0] - 2019-05-01
- Access to Parametric Products Service Database
- New Layout with Property Grid for Settings
- Support for new PCR2 Firmware 1.3.x
[4.3.2] - 2019-03-13
- Set LinkCheckInterval to 0 for disabling LinkCheck completely (needs PCR2 FW >=1.2.0)
- FSB Select only shown on AU and US models
[4.3.1] - 2019-03-07
[4.2.1] - 2018-11-21
- Fixed timeout issue on PCR1 when saving
- added Load/Save Menu to PCR1
[4.2.0] - 2018-11-10
- Support for new PCR2 Firmware 1.2.x
- New selector “FSB”
- Fixed production mode entry
[4.1.1] - 2018-10-31
BUGFIX
- Updated NuGet Packages as we had problems to install on italian Windows system
[4.1.0] - 2018-10-16
IMPROVEMENTS
[4.0.1] - 2018-09-14
BUGFIXES
[4.0.0] - 2018-09-06
- updating to .Net 4.7.2
- new icons
CHANGES
- sends “restart” to PCR2 after saving LoRa keys
- uses .Net4.7.1
- updated NuGet packages
[3.1.1] - 2018-07-24
Integrated Production Mode, Removed ABP
CHANGES
- Temporarely disabled ABP as Firmware < 1.0 is not ready
[3.1.0] - 2018-07-19
Integrated Production Mode
NEW
- Temperature calibration (production mode)
CHANGES
- You could enter production mode by holding CTRL and clicking the Parametric logo
- Renamed AppEUI to JoinEUI
BUGFIXES
[3.0.0] - 2018-07-15
Integrated PCR2
CHANGES
- PCR1 schreibt immer Port 14
BUGFIXES
[2.2.0] - 2018-06-05
CHANGES
- one ‘Set’ Button for all settings
- Version in Title
BUGFIXES
[2.1.0] - 2018-05-04
NEW
- changed Name to PCRSetupTool
- link to Website
[2.0.0] - 2018-04-13
NEW
- automatic port scanning
- new install source: https://feed.parametric.ch/pcr1/setup/