PCR2-IN Capacity Alarm Setup Manual

This manual describes the steps to configure a PCR2-IN device for use as a Capacity Alert Counter.



Use PCR Setup Tool to change the following device settings.

Settings for Capacity Alert

(1) Change Operation Mode to CapacityAlert

(2) Set Capacity Limit to reflect the number of people you allow to enter

(3) Disable LoRaWAN™ if there is no network (offline mode)

(4) Press Save to write changed settings to the device

CapacityAlert Mode Description

If difference between left-to-right and right-to-left counts becomes more than Capacity Limit one LED will start blinking. As soon as the difference drops below Capacity Limit the LEDs are off.

With this you could build an easy capacity management system in times of the COVID-19 spread.